Detail Information

Standards & Clauses:
This tumbling bucket free fall test apparatus conforms to the requirements of the standard IEC 60068-2-32 - Test procedure 2 in accordance with the requirements of IEC 60335-1 clause 21 and Annex B.101, IEC 60335-2-101:21.101, IEC 60065:2014 clause 12.3 and others.

The equipment is suitable for testing the drop resistance of plugs and sockets, surface mount boxes, threaded connectors, gland, switches and other electrical accessories.

The test time can be preset and the test device will stop automatically when the test time reaches the set value. The device is easy to operate.
Technical Parameters:

Samples and Restrictions:
Plugs and sockets, plug-in ballasts/transformers and power sockets for mounting luminaires, non-wireable connectors.

Application:
It is used for free-fall testing of plugs and sockets, plug-in ballasts/transformers and power sockets with fixtures mounted on them, and non-wirable connectors.

Test Principle:
The motor drives the drum to rotate, and then the specimen repeatedly free-falls onto a specified surface at a specified height.

Structure:

The test equipment consists of an electric control cabinet and a drum. The test time can be set in advance, and the test will stop automatically after completing the pre-set test time.
Equipment size: Approx. 800 × 800 × 1100 (mm) W × D × H
Equipment weight: 100 kg
Use Environment:
Power supply: AC220V±10%/50-60Hz or according to customer's local power requirement
Operating temperature 0-40 ° C, humidity: 30% - 90%