-
IEC 62368 Test Equipment
- IEC60529 IP CODE TESTING...
-
IEC60335-1 Testing equip...
-
Flammability Test Chambe...
-
IEC60884-1Testing Equipm...
- Accessibility Probes
-
Impact Testing
-
IEC60061-3 lamp gauge
-
Electric Safety Tester
-
Environment Test Chamber
-
UL Testing equipment
-
LED Test Instruments
-
Plug, Socket & Switch Te...
-
Oscilloscope
-
Electronic Components Te...
-
Force Meter
-
Tensile Testing Machine
-
Other product
-
Plug and Socket Gauges
Application:
Needle Flame tester is designed and manufacture according to IEC60695-11-5 and other similar international standards.
With predetermined size(Φ0.9 mm) needle burner, in 45°angle burning product, measure the fire risk by product light-off or hold burning time .
Used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector such as electrical and electronic equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics.
|
Needle burner |
inner hole diameter Φ0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel |
|
Burner angle |
0°, 20°, 45°(adjust flame height) |
|
Thermocouple |
?0.5mm Type K(Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C |
|
Burning time |
0-999.9s ± 0.1s adjustable(usually selected for 30s) |
|
Hold Burning time |
0-999.9s ± 0.1s, automatic recording, manual timeout |
|
Flame Height |
12mm ± 1mm(with height measurement instruments) |
|
Flame Gas |
butane gas/Butane gas, min. 95% purity(can use bottled lighter gases) |
|
Temperature Test Range |
0~1000°C |
|
Flame Temp Requirements |
from 100°C ± 2°C liters to 700°C±3°C time in 23.5 seconds ±1 seconds |
|
Standard Copper Block |
4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP |
|
Test process |
automatic control, independent convulsions |
|
Chamber |
≥0.5m3 |
|
Size |
W1100mm×D700mm×H1300mm, exhaust hole ?100mm |
|
Control |
Using single chip microcomputer + touch screen control |
|
Consult standard |
IEC60695-2-10 |
|
Power Supply |
800VA ,220V, 48-60Hz |
|
Display panel language |
English |
